As an Amazon Associate I earn from qualifying purchases.
Akasa Addressable RGB LED Splitter Cable | 1-to-2 aRGB LED Splitter | 3-Pin Connector | 1 Female to 2 Male | 12cm | AK-CBLD08-12BKAkasa
- 1 female to 2 male 3-pin connector - the female end connects to 5v aRGB MB connector; The male end connects to 5V aRGB LED fan or 5V aRGB LED strip. Easy to use - easily to turn one lighting connection into two through 12cm cables.
1-to-2 argb led splitter - converts one 5v 3-pin addressable RGB LED connector into two 5V 3-pin Addressable RGB LED connectors. Compatibility - compatible with ASRock, ASUS and MSI Addressable RGB motherboards. 3-pin connector for addressable RGB - Split and extend a lighting connection, supports 5V aRGB.
|Height||1.6 cm (0.63 Inches)|
|Length||11 cm (4.33 Inches)|
|Weight||0.01 kg (0.02 Pounds)|
|Width||7.8 cm (3.07 Inches)|
|Warranty||2 year manufacturer|
2. sourcing map
Sourcing map PWM Fan Splitter Cable, Pack of 2, 10.6 Inch 4 Pin Female to 3 Pin Male PC Fan Sleeved Power Extension Cable Adapter 1 to 2 Converter for Computersourcing map
- With the 1 to 2 converter and black sleeved braided adapter, you can easily extend the reach of your fans and create a clean and tidy look inside your PC case. 1. One end connects to the interfaces in the motherboard and the other end connects to the computer fans.
Color: black; material: plastic, copper; length: 27 cm / 106 inch; plug type: 4 pin female to 3 pin male; cable Type: 1 to 2; Packing List: 2 x PWM Fan Splitter Cable.
The black sleeved nylon braided cable is not only stylish but also durable, ensuring long-lasting use and protection against wear and tear.
The pwm fan splitter cable mainly functions by extending the cable which connects the motherboard to the PWM computer fans. Need to check the pin numbers and plug type of our cable before ordering. At the same time, it can split 1 pWM fan cable line into 2 lines through one interface in the motherboard, which can ensure optimal cooling performance. 2.
ARGB Fans with Protective Cap, 2Pack, 1 Female to 4 Male Ports 3 Pin Addressable RGB Splitter Extension Connector for ARGB LED Strips, MEIRIYFA 5V 3 Pin ARGB Splitter CableMEIRIYFA
- Note: 1-to-4 argb splitter cable, only supports 3 pin 5V addressable rgb motherboard header, does not support 4 pin 12V RGB header. Multi-interface, smooth link, help solve the problem of insufficient ARGB interface.
Argb splitter cable compatible with asus, mSI, GIGABYTE and ASROCK addressable RGB motherboards. High safety: protective cap is used to protect other unused connectors from electric shock and short-circuit causing damage to the chassis.
Keep it effortless and hassle free. 3-pin argb header compatibility, 13. 4inch/34cm long and flexible material makes it easy for cable routing.
Simple and practical: argb splitter allows to extend and connect its addressable ARGB LED or ARGB fan through a single motherboard 5V 3 pin ARGB header. And protect the connector, prevent the connector from being corroded by dust, oxidation and rust, liquid, and keep the connector clean and durable.
|Manufacturer||Shenzhen Mili Dianzi|
|Height||0.5 cm (0.2 Inches)|
|Length||12 cm (4.72 Inches)|
|Width||4 cm (1.57 Inches)|
|Part Number||5V 3 Pin ARGB|
4. sourcing map
5V 3Pin to SM 3Pin Female 1 to 3 Extension Cable Adapter Connector Addressable for PC Fan Power Computer Chassis Motherboard, sourcing map ARGB Splitter, Pack of 2sourcing map
- It can save argb interfaces, and the rest interfaces can be used for other purposes. Please note that this is only suitable for 5v 3 Pin ARGB not 12v 4 Pin RGB. The argb splitter mainly functions by extending the cable which connects the motherboard to the ARGB computer fans.
One end connect to the ARGB interfaces and the other end connect to other computer fans. At the same time, it can split the ARGB line into 3 lines through one ARGB interface in the motherboard.
Color: black; material: plastic, copper; length: 30 cm / 11. 8 inch; cable type: 5v 3pin to sm 3pin; core: 24AWG; Packing List: 2 x ARGB Splitter. You can also use it as extending cable by multi cables. You have to prepare the 5V 3 pin ARGB pin header yourself. The outside of the connector is wrapped with plastic material, durable to use.
5. sourcing map
Sourcing map ARGB Splitter Cable with 3P Connector for 5050 3528 LED 1 to 2 Female 30cm 3 Setsourcing map
- Advantage - useful for a supplying multiple RGB fans port from one preferred location. Operation - pre-soldered female connectors, easy to use, just plug to install. Parameter - voltage: 5v; cable length: 30cm / 12 inch; per Port Provided a Connector: Yes;Type: 1 Female to 2 Female; Interface Pin: 3.
Note - please do not match the addressable rgb5v argB/Digital RGB fan to a non-addressable RGB12V Standard RGB controller. Application - argb splitter extension cable, widely used for connecting to the 5050/3528 RGB LED or RGB fans.
CERRXIAN 3PCS 5V 3PIN ARGB Splitter Cable, 1 Female to 2 Male Ports 3PIN HUB Extension Connector Cord Wire for ARGB LED Strips,ARGB Fans EtcCERRXIAN
- Each 3pin male interface is equipped with an insulating protective cap to protect the needle from bending and deformation, and prevent other unused connectors from electric shock and short circuit damage to the motherboard.
5v argb splitter cable is 33. 5cm long and about 13. 1in, which can meet most of the chassis wiring needs. 1 to 2 ports argb hub allows expansion of the connection through a single motherboard +5V 3PIN ARGB interface, helping to solve the problem of insufficient ARGB interface.
Widely compatible with standard 5v 3-pin interface, gigabyte, msi, etc. Note:12v rgb is not supported, asrock, compatible with motherboards such as ASUS, only 5V RGB is supported. Suitable for 5v argb products, argb led, support ARGB cooling vest with standard 5V 3-pin interface, RGB fan, etc.
And RGB Light, WiFi Receiver, 9Pin Internal USB Hub Port for CPU, Fans, 9pin USB Header Male 1 to 4 Female Extension Card USB 2.0 Splitter Cable Connector for Motherboardwinwill
- Internal usb hub with wired belt shielding, this connection can ensure a stable connection, allow to add additional PC components to motherboard, and integrate with motherboard in spite of limited USB headers. Wide application: internal 9pin usb splitter convert 1 motherboard usb 2.
0 male to 4 females. Usb internal hub for motherboard, as it can convert motherboard 1 USB 2. 0 male to 4 female. With a 30cm/ usb head cable, it easy to place the board at a convenient location.
This adapter as an usb 2. 0 motherboard splitter can connect more devices. It is purely for data but not power, tp link pcie, sata/pcie ssd card, wifi card, cooling fans and RGB light inside the motherboard, so a good ideal connect Corsair commander pro, CPU, solve your interface USB port shortage of motherboard.
Useful: connector a: 9 pin usb 2. 0 male, connector b: 4x 9 pin usb 2. 0 female;extend 9 pin USB 2. 0 port to 4x 9 pin USB 2. 0 ports;Prevent short circuit outlet design. Easy instal:self-stick 9 pin motherboard USB Splitter for easy installation, automotive adhesive tape is attached on the back, can be directly fixed on the mainboard or chassis.
|Weight||0.04 kg (0.09 Pounds)|
4Pcs 4PIN PC Fan Splitter Extension Cable,1 to 2 PWM Fan Y Splitter for 3 Pin & 4 Pin PC Cooling Fanswinwill
- Usage:this item allows for three 4-pin fans to use one motherboard header or one standard 4-Pin power cable either from a power supply or a fan controller. Connector: 1: 4-pin female; 2: 4-pin/3-pin male one is 3-pin, the other is 4-pin.
Package include: 4pcs 106in 4pin 1 to 2 splitter fan power supply extension cable. Good quatity: black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean & tidy. Function: the fan splitter connects 2 computer case Fans to a Single Motherboard Fan Header, Compatible With 4 Pin and 3 Pin PMW Fan Connector.
CPU Cooler and 5V ARGB Fan, YACSEJAO ARGB Splitter Cable 5V 3Pin Addressable RGB 1 to 3 Splitter Cable with Male Pins for Computer ChassisYACSEJAO
- Quality materialsusing soft pVC material, the cable is firmly sleeved and wrapped to provide long-lasting performance and avoid dust and breakage.
Easy to installequipped with male pins. No soldering, save time. Note only supports 3 pin 5v addressable rgb motherboard header, does not support 4 pin 12V RGB header. Make sure arrow to arrow, installation without tools, plug and play.
Wide range of usesargb splitter cable compatible with ASUS, MSI, GIGABYTE and ASROCK addressable RGB motherboards. Functionargb splitter cable allows to extend and connect its addressable ARGB LED or ARGB fan through a single motherboard +5V 3 pin ARGB header.
Converter MB USB 2.0 Female to 2 Female, 30CM Cable USB 9-pin Internal Cable 9 pin Connector Adapter Port Multiplier, Rocketek Motherboard USB 2.0 9pin Header 1 to 2 Extension Hub Splitter AdapterRocketek
- Easy install: motherboard internal usb splitter with back 3M glue to stick in your case. Wide application: internal 9pin usb splitter convert 1 motherboard usb 2. 0 male to 2 females.
Cable length is 30cm, small enough that you can place it main board or chassis without hassle. Lighting Node Pro. International products have separate terms, are sold from abroad and may differ from local products, and language of product, age ratings, including fit, labeling or instructions.
This adapter as an usb 2. 0 motherboard splitter can connect more devices.
It is purely for data but not power, wifi card, cpu, cooling fans and rgb light inside the motherboard, TP Link PCIE, so a good ideal connect Corsair commander pro, SATA/PCIE SSD card, solve your interface USB port shortage of motherboard. Wide compatibility: pc usb splitter motherboard with win 2000/Win XP/2003/Vista/2008/Win 7/Win 8/Win10/Linux/Mac.
|Height||1 cm (0.39 Inches)|
|Length||1 cm (0.39 Inches)|
|Width||1 cm (0.39 Inches)|