As an Amazon Associate I earn from qualifying purchases.1. Dttery
3 Foam & Felt Filters Kit Replacement for Shark Rotator Professional Lift-Away Upright Vacuum NV500, NV552, NV502, NV642, NV510, UV560 Part XFF500, NV501
Dttery - 3 foam & felt filters kit, along with a cleaning brush. Replaces shark part # XFF500 Fits shark rotator professional Lift Away Upright Corded Bagless Vacuum NV501.
Compatible shark rotator professional lift away vacuum nv500, nv552, NV502, nv503, NV642, nv510, nv501, NV505, UV560 filter replacement. 100% satisfaction or your money back; 30 days of refund or replacement for any dissatisfaction.
2. YHBHNB
YHBHNB HosesHose Handle Compatible with Shark Rotator Professional Lift-away Upright Vacuum Cleaner Nv552 Nv500 Nv501 Nv501 31 Vacuum Accessories
YHBHNB - Worth value - this replacement duct hose is worth to replace and make your vacuum like new. The suction device captures worms, household dust and other particles, pollen, thereby preventing them from recirculating into the air.
The hose insert the small head into the other straight tube or plug into brush can extend the working length, such as high bookshelf, ceiling dust, easy to handle a variety of difficult to clean ground, and corners that are not easy to reach.
Perfect function: It ensures that your machine continues to operate with maximum performance and efficiency.
Exact fit and super easy to install. Easy to use: vacuum cleaner hose adaptor has simple operation and can be easily connected to workshop vacuum cleaners, industrial vacuum cleaners or wet and dry vacuum cleaners to achieve comfortable dust removal. Easy - the replacement duct hose helps filter household dust, particles bring you a clean environment.
3. SPARES2GO
NV801 Upright Vacuum Cleaner, SPARES2GO HEPA Filter Kit compatible with Shark Rotator Professional Lift-Away NV680
SPARES2GO - 3. Cleaning instructions: 1, press the bottom empty release latch. Hepa filter kit made for spares2go to fit Shark Rotator Professional Lift-Away Upright Vacuum Cleaner. Filters are not machine washable but can be rinsed under tap to clean before being replaced every 3 months.
Press the top dust cup release latch to access the dust screen and remove built-up debris as required. Pack contains: 1 x hepa motor filter: 105mm x 90mm x 35mm, 1 x sponge motor filter - outer Diameter: 85mm, Inner Diameter: 25mm Height: 50mm -- 1 x Felt Filter - Diameter 105mm Depth: 5mm.
They are included as a guide to assist you in selecting the right part for your machine**.
4, with the dust cup removed, Pull up on the dust cup release latch and lift the dust cup off the pod. 2 holding the dust cup over a garbage bag or can, remove the foam and felt filters. Please note: all dimensions indicated in this ad are approximate and may vary slightly from indicated measurements. Fits models: nv680, NV801. Replace them with the new filters.
4. SPARES2GO
SPARES2GO Duct Hose + HEPA Filter Kit compatible with Shark Rotator Professional Lift-Away NV601 NV680 NV801 Upright Vacuum Cleaner
SPARES2GO - Duct hose + hepa filter kit made for spares2gO to fit Shark Rotator Professional Lift-Away Upright Vacuum Cleaner. Press the top dust cup release latch to access the dust screen and remove built-up debris as required. The shark name, model names and any part numbers have been used for reference purposes only and are in no way associated with the original manufacturer.
3. Filter instructions: 1, pull up on the dust cup release latch and lift the dust cup off the pod. Replace them with the new filters. 2 holding the dust cup over a garbage bag or can, press the bottom empty release latch.
Please note: all dimensions indicated in this ad are approximate and may vary slightly from indicated measurements. They are included as a guide to assist you in selecting the right part for your machine**.
Fits models: nv601, nv680, NV801. Please note: this product is not manufactured by shark, but it is designed to be compatible with SHARK machines. Filters are not machine washable but can be rinsed under tap to clean before being replaced every 3 months. Pack contains: 1 x lower duct hose, 1 x sponge motor filter - outer diameter: 85mm, 1 x hepa motor filter: 105mm x 90mm x 35mm, Inner Diameter: 25mm Height: 50mm -- 1 x Felt Filter - Diameter 105mm Depth: 5mm.4, with the dust cup removed, remove the foam and felt filters.
5. SPARES2GO
SPARES2GO Duct Hose + HEPA Filters Kit for Shark Rotator Professional Lift-Away NV601 NV680 NV801 Upright Vacuum Cleaner
SPARES2GO - Pack contains: 1 x lower duct hose, 2 x sponge motor filter - outer diameter: 90mm, 2 x hepa motor filter: 105mm x 90mm x 35mm, Inner Diameter: 40mm Depth: 50mm -- 2 x Felt Filter - Diameter 120mm Depth: 5mm.
Press the top dust cup release latch to access the dust screen and remove built-up debris as required. Duct hose + hepa filters kit made for spares2GO to fit Shark Rotator Professional Lift-Away Upright Vacuum Cleaner.
3. Filter instructions: 1, with the dust cup removed, pull up on the dust cup release latch and lift the dust cup off the pod.
Replace them with the new filters. Premium quality, fully compatible replacement / spare part. Filters are not machine washable but can be rinsed under tap to clean before being replaced every 3 months. 4, remove the foam and felt filters. Fits models: nv601, nv680, NV801. 2 holding the dust cup over a garbage bag or can, press the bottom empty release latch.
6. SPARES2GO
NV680, SPARES2GO HEPA Filter Kit compatible with Shark Rotator Professional Lift-Away NV601, NV801 Upright Vacuum Cleaner Pack of 4
SPARES2GO - Please note: this product is not manufactured by shark, but it is designed to be compatible with SHARK machines. Replace them with the new filters. Please note: all dimensions indicated in this ad are approximate and may vary slightly from indicated measurements.
Hepa filter kit made for spares2go to fit shark Rotator Professional Lift-Away Upright Vacuum CleanerPack of 4. Fits models: nv601, nv680, NV801. Pack contains: 4 x hepa motor filter: 105mm x 90mm x 35mm, 4 x sponge motor filter - outer Diameter: 85mm, Inner Diameter: 25mm Height: 50mm -- 4 x Felt Filter - Diameter 105mm Depth: 5mm.
Press the top dust cup release latch to access the dust screen and remove built-up debris as required. 2 holding the dust cup over a garbage bag or can, remove the foam and felt filters.
3. 4, pull up on the dust cup release latch and lift the dust cup off the pod. Filters are not machine washable but can be rinsed under tap to clean before being replaced every 3 months. Cleaning instructions: 1, with the dust cup removed, press the bottom empty release latch. They are included as a guide to assist you in selecting the right part for your machine**. The shark name, model names and any part numbers have been used for reference purposes only and are in no way associated with the original manufacturer.
7. SPARES2GO
SPARES2GO HEPA Filter Kit compatible with Shark Rotator Professional Lift-Away NV680, NV801 Upright Vacuum Cleaner Pack of 10 Filters
SPARES2GO - Replace them with the new filters. Please note: all dimensions indicated in this ad are approximate and may vary slightly from indicated measurements. 3. Hepa filter kit made for spares2go to fit shark Rotator Professional Lift-Away Upright Vacuum Cleaner Pack of 10 Filters are not machine washable but can be rinsed under tap to clean before being replaced every 3 months.
4, pull up on the dust cup release latch and lift the dust cup off the pod.
Cleaning instructions: 1, with the dust cup removed, press the bottom empty release latch. They are included as a guide to assist you in selecting the right part for your machine**.
Pack contains: 2 x hepa motor filter: 105mm x 90mm x 35mm, 2 x sponge motor filter - outer Diameter: 85mm, Inner Diameter: 25mm Height: 50mm -- 4 x Felt Filter - Diameter 105mm Depth: 5mm. Press the top dust cup release latch to access the dust screen and remove built-up debris as required. Fits models: nv680, NV801. 2 holding the dust cup over a garbage bag or can, remove the foam and felt filters.
8. SPARES2GO
NV801 Upright Vacuum Cleaner Pack of 5 Filters, SPARES2GO HEPA Filter Kit compatible with Shark Rotator Professional Lift-Away NV680
SPARES2GO - 3. Fits models: nv680, NV801. Press the top dust cup release latch to access the dust screen and remove built-up debris as required. Cleaning instructions: 1, press the bottom empty release latch. Replace them with the new filters.
They are included as a guide to assist you in selecting the right part for your machine**. Filters are not machine washable but can be rinsed under tap to clean before being replaced every 3 months.
4, with the dust cup removed, Pull up on the dust cup release latch and lift the dust cup off the pod. Pack contains: 1 x hepa motor filter: 105mm x 90mm x 35mm, 2 x sponge motor filter - outer Diameter: 85mm, Inner Diameter: 25mm Height: 50mm -- 2 x Felt Filter - Diameter 105mm Depth: 5mm.
Please note: all dimensions indicated in this ad are approximate and may vary slightly from indicated measurements. Hepa filter kit made for spares2go to fit shark Rotator Professional Lift-Away Upright Vacuum Cleaner Pack of 5. 2 holding the dust cup over a garbage bag or can, remove the foam and felt filters.
9. SPARES2GO
SPARES2GO HEPA Filter Kit + Brush compatible with Shark Rotator Professional Lift-Away NV680 NV801 Upright Vacuum Cleaner
SPARES2GO - 3. They are included as a guide to assist you in selecting the right part for your machine**. Cleaning instructions: 1, with the dust cup removed, pull up on the dust cup release latch and lift the dust cup off the pod. The shark name, model names and any part numbers have been used for reference purposes only and are in no way associated with the original manufacturer.
Press the top dust cup release latch to access the dust screen and remove built-up debris as required. Fits models: nv680, NV801. 4, remove the foam and felt filters. Hepa filter kit made for spares2go to fit Shark Rotator Professional Lift-Away Upright Vacuum Cleaner.
Please note: all dimensions indicated in this ad are approximate and may vary slightly from indicated measurements. 2 holding the dust cup over a garbage bag or can, press the bottom empty release latch.
Filters are not machine washable but can be rinsed under tap to clean before being replaced every 3 months. Pack contains: 1 x hepa motor filter: 105mm x 90mm x 35mm, 1 x sponge motor filter - outer diameter: 85mm, inner Diameter: 25mm Height: 50mm -- 1 x Felt Filter - Diameter 105mm Depth: 5mm -- 1 x 18cm Cleaning & Dusting Brush: Ideal for cleaning the filters. Replace them with the new filters. Please note: this product is not manufactured by shark, but it is designed to be compatible with SHARK machines.
10. SPARES2GO
NV7, NV642 Upright Vacuum Cleaner Pack of 10 Filters, UV560, SPARES2GO Complete HEPA Filter Kit compatible with Shark Rotator Professional Lift-Away NV5
SPARES2GO - 4, remove the foam and felt filters. 2 holding the dust cup over a garbage bag or can, press the bottom empty release latch. Fits models: nv500, nv501, uv560, nv505, nv503, nv510, nv500co, nv552, nv502, nv520, nv753, NV642. Please note: all dimensions indicated in this ad are approximate and may vary slightly from indicated measurements.
Press the top dust cup release latch to access the dust screen and remove built-up debris as required. Filters are not machine washable but can be rinsed under tap to clean before being replaced every 3 months.
Pack contains: 2 x hepa motor filter: 105mm x 90mm x 35mm, 4 x sponge motor filter - outer Diameter: 85mm, Inner Diameter: 25mm Height: 50mm -- 4 x Felt Filter - Diameter 105mm Depth: 5mm.
3. They are included as a guide to assist you in selecting the right part for your machine**. Replace them with the new filters. Cleaning instructions: 1, with the dust cup removed, pull up on the dust cup release latch and lift the dust cup off the pod. Hepa filter kit made for spares2go to fit shark Rotator Professional Lift-Away Upright Vacuum Cleaner Pack of 10 Pre motor filter for shark rotator powered lift-away AX910 NV680 NV800 Duo Clean https://www. Ebay.
Dttery - 3 foam & felt filters kit, along with a cleaning brush. Replaces shark part # XFF500 Fits shark rotator professional Lift Away Upright Corded Bagless Vacuum NV501. Compatible shark rotator professional lift away vacuum nv500, nv552, NV502, nv503, NV642, nv510, nv501, NV505, UV560 filter replacement. 100% satisfaction or your money back; 30 days of refund or replacement for any dissatisfaction.
YHBHNB - Worth value - this replacement duct hose is worth to replace and make your vacuum like new. The suction device captures worms, household dust and other particles, pollen, thereby preventing them from recirculating into the air.
SPARES2GO - 3. Cleaning instructions: 1, press the bottom empty release latch. Hepa filter kit made for spares2go to fit Shark Rotator Professional Lift-Away Upright Vacuum Cleaner. Filters are not machine washable but can be rinsed under tap to clean before being replaced every 3 months.
SPARES2GO - Duct hose + hepa filter kit made for spares2gO to fit Shark Rotator Professional Lift-Away Upright Vacuum Cleaner. Press the top dust cup release latch to access the dust screen and remove built-up debris as required. The shark name, model names and any part numbers have been used for reference purposes only and are in no way associated with the original manufacturer.
SPARES2GO - Replace them with the new filters. Please note: all dimensions indicated in this ad are approximate and may vary slightly from indicated measurements. 3. Hepa filter kit made for spares2go to fit shark Rotator Professional Lift-Away Upright Vacuum Cleaner Pack of 10 Filters are not machine washable but can be rinsed under tap to clean before being replaced every 3 months.
