Top 7 Brass Lamp Holder UK – Lamp Bases

As an Amazon Associate I earn from qualifying purchases.

1. ElekTek

ElekTek Safety Switch Lamp Bulb Holder 10mm Entry BC B22 with Shade Ring and Locking Screw in Base Brass

ElekTek - For all types of b22 22mm bayonet Cap Bulb: Incandescent, LED and Halogen. Suitable for lighting circuits only - T2 temperature rating 220°C. Fully approved to BS 7895:1997.

Dimensions: choice of 10mm or 1/2" threaded bottom entry - please check your thread size bEFORE ORDERING; Height 63mm, Diameter 32mm Max. Cable/Flex aperture approx. Important: switch will only work when a bulb is fitted - Patented Safety Switch Push-Bar Design. 7mm. Made in uk: solid brass construction with solid brass shade ring. Always remember: metal fittings must be earthed - when re-assembling after wiring, please ensure Earth Strap on the switch insert sits outside of the lamp holder body as originally supplied - do not squeeze inside the lamp holder body.
BrandElekTek
ManufacturerElekTek
Part Number.
Model.

2. Art Deco Emporium

B22 Solid Brass Earthed Lamp Bulb Holder with 10mm Threaded Entry

Art Deco Emporium - Fully Earthed. Traditional Fitting with Internal Screw Terminals. Uk supplied - art Deco Emporium Ltd. With shade Ring. 10mm threaded Wire Entry.
BrandArt Deco Emporium
ManufacturerArt Deco Emporium Ltd
Height3.3 cm (1.3 Inches)
Length3.6 cm (1.42 Inches)
Weight0.04 kg (0.09 Pounds)
Width3.3 cm (1.3 Inches)
Part NumberLHB22-R00-BRS
ModelLHB22-R00-BRS

3. ElekTek

Brass, ElekTek B22 BC Batten Lamp Holder 52mm Diameter Base 3 Fixing Holes

ElekTek - B22 22mm bayonet cap with shade ring - suitable for bulbs up to 200W. Ceramic interior with Earth terminal and brass plunger contacts. Made in the UK. Please check your bulb cap type & size before ordering. 3 fixing holes on 40mm centres PCD, Base diameter 52mm, Maximum height 39mm.
BrandElekTek
ManufacturerElekTek

4. Thunderfix

Brass Lamp Holder Small Bayonet Cap SBC B15d Fitting Bulb Holder 1/2" Screw Thread

Thunderfix - Shiny brass. Sbc brass lampholder. Small size 4cm long, top opening 1. 5cm, base opening 1. 3cm. Fit to lamp shades.
BrandThunderfix
ManufacturerThunderfix
Height2.2 cm (0.87 Inches)
Length1.57
Width0.87
Part Number100499

5. ElekTek

Brass Lamp Holder Fixed Batten SBC B15 Shade Ring

ElekTek - Sbc b15 15mm small bayonet cap, base diameter 38mm, maximum height 32mm, 3 Fixing holes on 30mm PCD. This solid brass sbc b15 15mm small bayonet connector batten lamp holder is intended primarily for attachment to flat surfaces. This lamp holder is the smaller size 15mm small bayonet cap standard uk bayonet fitting. Complete with earth terminal, shade ring, brass plunger contacts & ceramic interior. It is not b22 size the larger standard UK B22 bayonet size. This product is suitable for lighting circuits only. T2 temperature rating 220°C. Made in the uk.
BrandElekTek
ManufacturerBuy It Better
Part NumberL007
ModelL007

6. Thunderfix

Brass Lamp Holder Bayonet Cap BC B22d Fitting Bulb Holder 10mm Screw Thread

Thunderfix - M10 x 1mm pitch Threaded Entry Size. Brass Finish Lampholder. These have Screw Terminals. Bayonet Cap Fitting.
BrandThunderfix
ManufacturerThunderfix
Part Number100799

7. N\A

Antique Brass Lamp Holder E27 Vintage Light Socket Bulb Socket with Knob for DIY Lighting Fixtures

N\A - Retro look providing ambiance and taste for vintage fixtures. Exquisite workmanship makes it will not rust, safe and durable. Suitable for desk lamp, bed lamp, bar counter lamp, dining-room lamp, fancy lamp. Antique bulb holder could assemble to a socket and cord for a hardwired lighting with an exposed bulb for a new fitting DIY. The light holder is made from premium aluminum. Each light holder's height about 7cm and base diameter is 3. 3cm. Suitable for kitchens, bars, dining rooms, restaurants, coffee shop, bedrooms, hotels and so on.
BrandN\A
ManufacturerSGuan
Weight0.06 kg (0.13 Pounds)